Author Topic: mio 50 electrics  (Read 2687 times)


  • Newbie
  • *
  • Posts: 2
    • View Profile
mio 50 electrics
« on: April 10, 2014, 07:11:23 AM »
hi guys help needed pls. i bought a dead mio of a mate. yeah you know the rest lol. well i bought a new cdi and off the kickstart she runs. all electrics ok exept the charging side. i only get 7.5 volts on the battery leads. now i replaced the reg/rec still 7.5v.

When the engine is running (by the way it only runs with battery not connected.) if i connect the battery it dies. now with the battery off the bike charged via charger it is 12.8 v. i tested the stator and only have 12v on the yellow and 16v on the white, The scoot  will crank with the battery on but i get no spark. the only time i got cranking and spark is when the batt voltage was 7v ish??

Im thinking faulty stator.

And help appreciated thanks. :'(


  • Full Member
  • ***
  • Posts: 156
    • View Profile
Re: mio 50 electrics
« Reply #1 on: April 10, 2014, 08:10:48 AM »
This Mio CDI discussion may, or may not, be helpful.


  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: mio 50 electrics
« Reply #2 on: August 22, 2014, 11:32:05 PM »
Old thread, but the battery sounds super dead.

An Error Has Occurred!

Call to undefined function split()