Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - system100m

Pages: [1]
1
Sym Symphony / Re: Symphony 200 belt dimensions
« on: April 07, 2021, 07:45:35 AM »
So I once again need to replace the Belt in my Symphony 200i 2016 (that's a new on I bought).

I found a replacement belt with the following marks on it "860 19.7 28", while I know the original part should read "860 19.7 28 T".

Do I really need the one with the "T" on it? what does the "T" mean?

2
General Discussion / Plug cap resistance...
« on: July 23, 2019, 03:59:55 AM »
The plug cap on my Symphony 200 was really bad and shaky, so my mechanic just took it off and place a new on instead. But then I read that some caps have resistors in them... what could happen if for example, the original one has a resistor while the new one doesn't, or vice versa ?  can this change damage the engine or another system ?

3
Sym Symphony / plug location too deep inside engine...
« on: July 23, 2019, 03:57:47 AM »
I wanted to replace the plug and then found that the plug is placed way deep inside the engine closure, in a way that it can easily fall into the engine area if not pulled or pushed in with special tools... this is the first time I encounter something like this!

Is anyone familiar with it ? how do you change it without risking it falling in there ?


4
Sym Symphony / Symphony 200 belt dimensions
« on: July 23, 2019, 03:55:45 AM »
Hello!

I was looking for a belt for my Symphony 200i CBS 2015. My mechanics suggested that part number 23100-A61-0000 that he has in stock, should fit, but this was a belt for Symphony 125, as noted on the package (rather than 200). I googled both the serials for the 125 and 200 belts, and they both appear to have the same dimensions, 860 x 19.7 x 28 , as noted in this site:
http://www.teamworld.com.tw/universal/product_detail.php?serial=558

This is, while the 200 belt has a different code:  23100-XMA-0000

So I was wondering if both belts indeed of the same size, and if so, then why SYM sells them as two different kits ? and if not, what would be the correct dimensions for the 200 model ?

Thanks!

Pages: [1]