Author Topic: replacing starter on joyride 200  (Read 638 times)

rocketman122

  • Newbie
  • *
  • Posts: 47
    • View Profile
replacing starter on joyride 200
« on: January 27, 2016, 10:10:00 AM »
wheres it located? how hard is it to replace it. is the 125cc the same as the 200cc? I do the maintenance on the bike. just asking so I dont have search all over for it. want someone to let me know so I can go straight to it. cheers.

Tromper

  • Sr. Member
  • ****
  • Posts: 284
    • View Profile
Re: replacing starter on joyride 200
« Reply #1 on: January 30, 2016, 02:38:39 PM »
Not my bike, but I was a bit curious so poked 'round a bit.

Sym Joyride 125 - 150 - 200 (EN)
Is a link that has the manual.  Says right and rear covers.  It'll be pretty obvious once the panels are removed.

Cheers.
Tromper
08 SYM HD200
07 Suzuki Burgman 650

rocketman122

  • Newbie
  • *
  • Posts: 47
    • View Profile
Re: replacing starter on joyride 200
« Reply #2 on: February 01, 2016, 03:38:18 AM »
bravo for the reply and help. cheers! will take a look see.

phipsd

  • Sr. Member
  • ****
  • Posts: 304
    • View Profile
Re: replacing starter on joyride 200
« Reply #3 on: March 21, 2016, 05:07:44 PM »
A bad cell in a battery can burn out a starter in fairly short order. This can happen even if the bike seems to start ok. I also found that the stock Taiwan Yuasa is junk. I switched to a Japanese AGM Yuasa. Your bike will start and run better and the reduced stress on the electrics will mean a more reliable scoot.