Author Topic: joyride 200 topend rebuild?  (Read 549 times)

markscups

  • Newbie
  • *
  • Posts: 1
    • View Profile
joyride 200 topend rebuild?
« on: August 29, 2015, 06:53:44 AM »
Hi, Iv stripped my joyride 200 2002 top end as compression was down and burnt some oil. Need to know if the parts are common with the later joyride models or even the HD200 eg gasket sets.
Also, the cylinder bore looks great but is 0.004mm outside tolerance. Trying to keep costs to a min, could I have the bore honed and just re_ring it. The current ring gap is oversize by 100% to much. This could be why its burning some oil. Any advice.
Cheers, Mark