Author Topic: Help please!  (Read 5474 times)

h11dsd

  • Newbie
  • *
  • Posts: 2
    • View Profile
Help please!
« on: June 16, 2011, 02:10:05 PM »
hey guys i'm new,

couple of issues with my jet euro 50x.

1. trying to buy a replacement exhaust, but the only exhausts available don't have a bracket to attach
    the engine breather box to. Is there an alternative to this box? is it needed?

2. drive belt replacement. This is not happenin, i have removed the cover but cant remove nuts to take
    pulleys off.

any help or suggestions welcome.

thanks

h11dsd

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Help please!
« Reply #1 on: June 16, 2011, 02:57:56 PM »
just found out that the "engine breather" is actually the catalytic converter.
so how do i remove it?

Mykal

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Help please!
« Reply #2 on: April 25, 2012, 03:33:44 PM »
To change out the drive belt:

Remove the crank shaft case.

Get an air powered wrench.  Find the right size attachment.  Hold the flywheel with one hand and air wrench off the bolt.  Do the same with the clutch.  Hold it with your hand ( I wear a glove with rubber hand grips ) and use the air wrench to pull off the bolt!


I had to take it into a shop and watch them do it to learn how!


GOOD LUCK!

* Since finding parts for this bike is a joke, I have found that the KYMCO 50cc belt works and they are easier to find.  I have a KYMCO dealer by my house and bought one there. Thing costs $50-$60 though.  UGH!

astrologerdev11

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Help please!
« Reply #3 on: June 17, 2012, 12:23:13 AM »
Sorry Friend i dont know more !!